人工點膠與機器操作概念完全不同
The concept of manual dispensing is quite different from the concept of machine operation.
人工點膠：人工攪拌膠水只能在操作範圍完成， 手工攪拌膠水會不斷有氣泡進去， 而且膠水流動性會越來越差， 膠量不好控制， 灌到產品上氣泡不容易消除。 自動點膠機的AB膠分別自動抽料至機器的料缸同時抽真空， 確保單組份膠水沒有氣泡。 機器整個過程都有密封的， 混合後的膠水無汽泡。 表面光滑， 點膠量非常精確。
Artificial glue: artificial mixing glue can only be completed in the operating range, hand stirring glue will continue to have bubbles, and the mobility of glue will become worse and worse, the amount of glue is not well controlled, and the bubble is not easy to remove. The automatic dispensing machine is automatically pumped to the cylinder of the machine and vacuumed at the same time to ensure that there is no bubble in one component of glue. The whole process of the machine is sealed, and the glue is mixed without bubbles. The surface is smooth and the amount of glue is very accurate.
自動點膠機是按自動比例出來後再混合， 剛混合好的膠水都是流動性最好的膠水， 出膠總量、出膠速度可調。 一直操作機器不需要清洗， 超過膠水可操作的時間30分鐘後進行自動清洗。
The automatic dispensing equipment is mixed automatically according to the automatic ratio, and the newly mixed glue is the best glue, the total output and the speed of dispensing are adjustable. The machine has been operated without cleaning, and it can be cleaned automatically after 30 minutes.
這裡還涉及到換膠水的問題， 點膠系統是可調的， 通過馬達控制計量泵的轉速控制出膠， 轉多少圈出多少克膠水。 點膠機一般按膠水的比例定做， 所有管路及計量泵都按比例做， 這樣可以延長使用壽命及確保精度。
Here also involves the problem of changing glue. The dispensing system is adjustable. The speed of the metering pump is controlled by the motor to control the glue output, and how many circles of glue are transferred to it. Dispensing machine is generally made according to the proportion of glue. All pipes and metering pumps are proportionately made so that the service life and accuracy can be prolonged.
點膠機廠家創盈時代建議大家一套設備用一款膠水， 不見議反反復複一台機器同時用幾款膠水， 因為清洗會比較麻煩， 所有經過膠水的部件都需要清洗， 售後完全熟練的也需要2個小時左右， 特別是計量泵及管路如果沒有清洗乾淨。 如果真的要更換另一款膠水， 大概花半天時間把壓力桶、計量泵、槍閥全部清洗乾淨， 管路見議重新更換， 比例直接在系統裡面調節即可， 膠水比例需要重新測試。
It is suggested that we use a set of glue for a set of equipment. It will be more troublesome because the cleaning will be more troublesome. All the parts that pass through the glue need to be cleaned, and the completely skilled after sale will take 2 hours or so, especially if the metering pump and pipeline are not cleaned. Net. If you really want to replace another glue, it will take about half a day to clean all the pressure barrel, metering pump and gun valve. The pipeline is replaceable and the proportion is directly adjusted in the system. The proportion of glue needs to be retested.
深圳市創盈時代科技有限公司是一家專注於平臺點膠機,落地式點膠機， 視覺點膠機， 非標自動化設備的研發生產和銷售於一體的國家高新技術點膠機廠家。
本文關鍵字：自動點膠機 人工點膠
原文位址：http://www.chytime.com/news/djjs/1725.html